Electronic Load Power Aviation Mode Battery Discharge Capacity Tester 20A 200W

Description

EBD-A20H
Electronic Load/ Battery/Power/
Aviation Model Power Battery
Capacity Tester 20A 200W
Dear, we do not
provide paper manual and CD-ROM. Please
leave your E-mail and we will send you the manual and softwear in English. Thank you!
Product Description
EBD-A20H is an electronic load with a variety of discharge modes. It can be used in various battery capacity tests, power tests, support for connecting computers, and more extensions via online software.
Product list
1. a tester
2. a
oneline
test
line
3. a power cord
4. a pair of test clamps
Product Parameter
Power supply: 110-220AC or DC12V 1A
Voltage setting: 0.00-30.00V, the minimum step 0.01V
Current setting: 0.01-20.00A Min step 0.01A, would limit the current when the power is overrun.
Mode setting: DSC-CC: discharge current is constant, used to test battery capacity or supply                                              current
DSC-CP: discharge power is constant, used to simulate constant power equipment                                        or test
power
Voltage test: 0.000-4.500V (low pressure) accuracy to 0.003V, error
±
0.5%
4.500V-30.000V(high presure) accuracy to 0.01V, error
±
0.5%
Current test:  0.01-20.00A, accuracy to 0.01A, error
±
0.5%
Capacity test: 10Ah, the resolution of 0.001Ah
10Ah-100Ah, the resolution of 0.01Ah
over 100Ah, the resolution of 0.1Ah
Discharge power: Max 200W, it will control within 90% as running long time.
Connection: four-wire detection, voltage and current channel separate wiring, to ensure                                   measurement accuracy
LCD display: voltage, current, capacity, time, power, energy test data
Computer Online:
dedicated USB to TTL serial port (aviation plug interface, not an ordinary USB                              cable)
computer control, curve plotting, calibration benchmarking,
automatic                                  current test,
firmware upgrade etc.
Note: the discharge current is limited by the maximum power,
less than 20A as
10V or more ,
below 10A as
20V or more
If you need charging function, you can choose EBC-A20