MINCO *hazardous location approved* humdity sensor

Description

New no box
Model#HT885DS25S60FI
Specifications Output(s): Humidity: 4 to 20 mA DC = 0% to 100% RH. Temperature: 4 to 20 mA DC over specified range (optional) Humidity Range: 0 – 100% RH Sensing Element: Humidity: Thin film capacitive element. Temperature: 1000 ohm platinum RTD. Temperature Effect: ±0.03% RH/°C ±1% from 10°C to 80°C Operating Temperature: Transmitter: -40 to 176°F (-40 to 80°C), non-condensing. -4 to 176°F (-20 to 80°C), model HT885D. Sensor: -40 to 302°F (-40 to 150°C). Storage Temperature: -40 to 185°F (-40 to 85°C), non-condensing. Supply voltage: 9.5 to 28 VDC for intrinsically safe (IS) and industrial models. 16.5 to 28VDC for explosionproof (XP) models. Voltage effect: ±0.001% of span/volt from 9.5 to 28 VDC. Loop resistance: The maximum allowable resistance of the signal-carrying loop, including extension wires and load resistors, is given by this formula: IS: Rloopmax = (Vsupply-9.5)/0.02 AMPS. For example, if supply voltage is 24 VDC, the loop resistance must be less than 725. XP: Rloopmax = (Vsupply-16.5)/0.02 AMPS. For example, if supply voltage is 24 VDC, the loop resistance must be less than 375. Accuracy: Includes temperature, linearity, hysteresis, repeatability, and voltage effects. Humidity: ±2.5% from 10% to 80% RH @25°C, ±3.5% from 80% to 90% RH @25°C Temperature: ±0.5°F (0.27°C) @ 25°C or +/- 0.8% of span, whichever is greater. Adjustments: Zero and Span field adjustments, non-interacting. Time Constant: 50 seconds in slow moving air. Connections: Screw terminals (22-14 AWG wire). Weight: 2.84 lbs (1.29 kg) for HT880, 4.46 lbs (2.02 kg) for HT885 Min. output current: 3.8 mA. Max. output current: 22 mA. Filter: 60 micron stainless-steel sintered filter (replacement P/N : AC103512) Factory Mutual Approvals: Explosionproof: See page 4. Intrinsically safe: See page 5. Entity Parameters: Vmax=28V, Imax=100mA, Ci=0.037uF, Li=0mH